The ProCurve Wireless AccessPoint10ag is ideal for small enterprise networks that need to deploy wireless connectivity quickly and easily with minimal investment. The WirelessAccessPoint10ag can be configured in just minutes using the intuitive Web Managed interface. The ProCurve
Access Point Features
* dual-radio design with IEEE 802.11a and IEEE 802.11b/g radios
* supports up to 54 Mbps data rate on the wireless interface
* supports 10/100Mbps data rate on the Ethernet interface with Auto-MDIX * supports up to eight (8) Service Set IDentifier (SSID) interfaces
* independent security settings per SSID interface
* supports up to 128 wireless clients and devices
* advanced security through 64-bit and 128-bit WEP encryption, Wi-Fi Protected Access (WPA and WPA2), IEEE 802.1X, remote authentication via a RADIUS server, and MAC address filtering features to protect your sensitive data and authenticate only authorized users to your network
* access control list
* secured authentication of wireless clients through the client’s Web browser
* dual power source options, including AC power adapter (included with device) and PoE (IEEE 802.3af)
* reset to factory default parameters
Installation Requirements
* Access point
* Power adapter (included in the access point package) or PoE switch
* Ethernet cable If the default IP address 192.168.1.14 is not compatible with your network settings, you will need to change it before you can set up the access point.
Wireless Client Requirements
For wireless clients and devices on the network to be able to communicate with the access point, they must have at least the following:
* An operating system that supports TCP/IP networking protocols (for example: Windows 2000/XP, UNIX, Mac OS 8.5 or later).
* An 802.11a, 802.11b, or 802.11g wireless network interface card
Technical Features A
* External I/O ports: 1 RJ-45 auto-sensing 10/100 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
* Memory and processor: MIPS 4000 at 220 MHz, 16 MB SDRAM, 2 MB flash ROM
* Management features: ProCurve Manager; Web browser
* Communications: IEEE 802.3 Type 10BASE-T; IEEE 802.3af Power over Ethernet; IEEE 802.3u 100BASE-X; IEEE 802.11a High Speed Physical Layer in the 5 GHz Band; IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band; IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band; IEEE 802.1X Port Based Network Access Control; WPA (Wi-Fi Protected
* Power availability: 0.6 / 0.2 A
* Power consumption: 7 W
Other Basic Features of the AccessPoint10ag include:
* one 10/100Base-TX RJ-45 port
* full-duplex operation for the 10/100 RJ-45 port
* easy management through a built-in graphical interface that can be accessed from common Web browsers
* RADIUS accounting for logging user activity on the network
* download of new access point software for software updates
* backing up and restoring of configuration file
Transmit power is regulated by international standards and users are forbidden to change its maximum limit.
* The AP10ag is compliant with IEEE 802.11d and will automatically limit the available channels and transmit-power level based on the Country/Region setting. Clients associating with the AP10ag will receive configuration information during the initial handshaking to enable compliant operation in the country/region of use.
